Exact Mass: 27.994915
Exact Mass Matches: 27.994915
Found 30 metabolites which its exact mass value is equals to given mass value 27.994915,
within given mass tolerance error 0.05 dalton. Try search metabolite list with more accurate mass tolerance error
0.01 dalton.
Carbon monoxide
Carbon monoxide, with the chemical formula CO, is a colorless, odorless, and tasteless gas. It is the product of the incomplete combustion of carbon-containing compounds, notably in internal-combustion engines. It consists of one carbon atom covalently bonded to one oxygen atom. It is a gas at room temperature. Carbon monoxide is a significantly toxic gas and is the most common type of fatal poisoning in many countries. Exposures can lead to significant toxicity of the central nervous system and heart. Carbon monoxide has a higher diffusion coefficient compared to oxygen and the only enzyme in the human body that produces carbon monoxide is heme oxygenase which is located in all cells and breaks down heme. Because it has a higher diffusion coefficient than oxygen the body easily gets rid of any CO made. When CO is not ventilated it binds to hemoglobin, which is the principal oxygen-carrying compound in blood; this produces a compound known as carboxyhemoglobin. The traditional belief is that carbon monoxide toxicity arises from the formation of carboxyhemoglobin, which decreases the oxygen-carrying capacity of the blood and inhibits the transport, delivery, and utilization of oxygen by the body. The affinity between hemoglobin and carbon monoxide is approximately 230 times stronger than the affinity between hemoglobin and oxygen so hemoglobin binds to carbon monoxide in preference to oxygen. Following poisoning, long-term sequelae often occur. Carbon monoxide can also have severe effects on the fetus of a pregnant woman. Despite its serious toxicity, CO is extremely useful and underpins much modern technology, being a precursor to a myriad of useful - even life-saving - products. Carbon monoxide, though thought of as a pollutant today, has always been present in the atmosphere, chiefly as a product of volcanic activity. It occurs dissolved in molten volcanic rock at high pressures in the earths mantle. Carbon monoxide contents of volcanic gases vary from less than 0.01\\% to as much as 2\\% depending on the volcano. It also occurs naturally in bushfires. Because natural sources of carbon monoxide are so variable from year to year, it is extremely difficult to accurately measure natural emissions of the gas. (wikipedia). Carbon monoxide, with the chemical formula CO, is a colorless, odorless, and tasteless gas. It is the product of the incomplete combustion of carbon-containing compounds, notably in internal-combustion engines. It consists of one carbon atom covalently bonded to one oxygen atom. It is a gas at room temperature. D018377 - Neurotransmitter Agents > D064426 - Gasotransmitters D009676 - Noxae > D000963 - Antimetabolites V - Various > V04 - Diagnostic agents
Nitrogen
Elemental nitrogen is a colorless, odorless, tasteless and mostly inert diatomic gas at standard conditions, constituting 78\\% by volume of Earths atmosphere. Nitrogen occurs in all living organisms. It is a constituent element of amino acids and therefore of proteins and nucleic acids (DNA and RNA). Nitrogen is found in the chemical structure of almost all neurotransmitters and is a key component of alkaloids. Specific bacteria (e.g. Rhizobium trifolium) possess nitrogenase enzymes which can fix atmospheric nitrogen into a form (ammonium ion) which is chemically useful to higher organisms. Animals use nitrogen-containing amino acids from plant sources, as starting materials for all nitrogen-compound animal biochemistry, including the manufacture of proteins and nucleic acids. Animal metabolism of NO (nitric oxide) results in production of nitrite. Animal metabolism of nitrogen in proteins generally results in excretion of urea, while animal metabolism of nucleic acids results in excretion of urea and uric acid. The characteristic odor of animal flesh decay is caused by nitrogen-containing long-chain amines, such as putrescine and cadaverine. Decay of organisms and their waste products may produce small amounts of nitrate, but most decay eventually returns nitrogen content to the atmosphere, as molecular nitrogen. The circulation of nitrogen from the atmosphere through organics and then back to the atmosphere is commonly referred to as the nitrogen cycle. Nitrogen can be measured in urine with the Kjeldahl method or by spectrophotometric methods (enzymic tests). Total urinary nitrogen is calculated based on urea urinary nitrogen quantified with these methods. V - Various > V03 - All other therapeutic products > V03A - All other therapeutic products > V03AN - Medical gases
Ethylene
Polyethylene (m w 2,000-21,000) is used as a food additive [EAFUS] ("EAFUS: Everything Added to Food in the United States. [http://www.eafus.com/]") Occurs naturally in ripening fruit and is used artificially to accelerate fruit ripening, e.g in banana transportation D006133 - Growth Substances > D010937 - Plant Growth Regulators C1907 - Drug, Natural Product > C28269 - Phytochemical
Cobalt
D018977 - Micronutrients > D014131 - Trace Elements 4-vinylpyridine, also known as 4-vinylpyridine hydrobromide or 4-vinylpyridine perchlorate, belongs to pyridines and derivatives class of compounds. Those are compounds containing a pyridine ring, which is a six-member aromatic heterocycle which consists of one nitrogen atom and five carbon atoms. 4-vinylpyridine is soluble (in water) and a very strong basic compound (based on its pKa). 4-vinylpyridine can be found in tea, which makes 4-vinylpyridine a potential biomarker for the consumption of this food product. 4-vinylpyridine is an organic compound with the formula CH2CHC5H4N. It is a derivative of pyridine with a vinyl group in the 2-position, next to the nitrogen. It is a colorless liquid although samples are often brown. It is used industrially as a precursor to specialty polymers and as an intermediate in the chemical, pharmaceutical, dye, and photo industries .
Silicon
Silicon (Si) is the second most abundant element in the Earths crust and although there has been interest in the biological role of Si since the beginning of the century, it is only in the last three decades that it has been suggested as an essential trace element. Si may have a role in a number of areas of human physiology and metabolism, especially bone and connective tissue formation, but possibly also gene expression and cardiovascular health. Si is rarely found in its elemental form as it readily reacts with atmospheric O2 and water to produce silicates. Physiologically, it exists as an ion in the body. These vary in composition from simple soluble orthosilicic acid and oligomers through to less soluble colloids and gels, and insoluble solid-phase silicates. The latter constitute the vast majority of environmental silicates (for example, soil minerals), although natural waters contain soluble silicates (mostly orthosilicic acid) generally at 1 to 20 mg/l. Orthosilicic acid is the most readily absorbed form of Si and silicate in man. Silicon plays an important role in bone mineralization and formation and is therefore incorporated into a wide variety of medical implants and bone grafts used today. Low bone mass (osteoporosis) is a silent epidemic of the 21st century, which presently in the UK results in over 200,000 fractures annually at a cost of over one billion pounds. Figures are set to increase worldwide. Understanding the factors which affect bone metabolism is thus of primary importance in order to establish preventative measures or treatments for this condition. Nutrition is an important determinant of bone health, but the effects of the individual nutrients and minerals, other than calcium, is little understood. Accumulating evidence over the last 30 years strongly suggest that dietary silicon is beneficial to bone and connective tissue health and we recently reported strong positive associations between dietary Si intake and bone mineral density in US and UK cohorts. The exact biological role(s) of silicon in bone health is still not clear, although a number of possible mechanisms have been suggested, including the synthesis of collagen and/or its stabilization, and matrix mineralization. The field of bioorganosilicon chemistry, which sprung up in the 1970s to exploit the opportunities of silicon for drug design, is currently being developed into a practical and commercial enterprise. Some of the fundamental differences between carbon and silicon can lead to marked alterations in the physicochemical and biological properties of the silicon-containing analogues and the resulting benefits can be exploited in the drug design process. Recent evidence confirms the fundamental involvement of the human immune system in the reaction to implantation of silicone based medical devices. An as yet to be particularized epitope of many complex substances sharing siloxane structures is presented through the MHC-II apparatus with development and retention of T cell memory. This memory can be tested for in practical terms using one or more forms of silica, which links the immuno-histopathology and autoimmune attributes of silicosis with those of siliconosis. The lesions of siliconosis are typical of those for persistent antigens and delayed, cell mediated hypersensitivity. The basic descriptive pathology of the reaction to silicone has been known since soon after introduction of silicones in medical procedures, with the exception of some details related to the more recent discoveries on the role of cytokines in the immunopathic process. The clinical consequences of siliconosis are common and can be severe in some individuals implanted with silicone devices. (PMID: 16277785, 16632368, 17435952, 12821303, 12951816, 9951648). Silicon (Si) is the second most abundant element in the Earths crust and although there has been interest in the biological role of Si since the beginning of the century, it is only in the last three decades that it has been suggested as an essential trace element. Si may have a role in a number of areas of human physiology and metabolism, especially bone and connective tissue formation, but possibly also gene expression and cardiovascular health. Si is rarely found in its elemental form as it readily reacts with atmospheric O2 and water to produce silicates. Physiologically, it exists as an ion in the body. ATC code: A03AX13
Cobalt
Cobalt has a molecular weight of 58.9 and an atomic number of 27. In the Periodic Table, close to other transition metals, it is situated in group 8, together with rhodium and iridium and it can occur in four oxidation states (0, +2, +3 and +4). The +2 and the ground state are the most common. Cobalt occurs in the minerals cobaltite (Co, Fe) AsS, smaltite (CoAs2), and erythrite Co3(AsO4)2.8H2O, and is often associated with nickel, silver, lead, copper, and iron ores, from which it is most frequently obtained as a by-product. Depending on the considered species, cobalt has multiple industrial applications including the production of alloys and hard metal, diamond polishing, drying agents, pigments and catalysts. Hard metal or cemented carbide is a powder metallurgical product consisting of hard, wear-resistant carbide particles bound together (cemented) with a ductile metal binder (i.e. metallic Co) by liquid phase sintering. Tungsten carbide (WC) is produced by mixing tungsten powder with pure carbon powder at high temperature; hereafter WC is mixed with Co powder to which paraffin is added as a binder. Depending on specific requirements related to their use, hard metals might additionally contain small quantities of chromium, niobium, molybdenum, titanium, tantalum or vanadium carbides. Inhalation and skin contact are the main occupational exposure routes. Occupational exposure to cobalt may result in adverse health effects in different organs or tissues, including the respiratory tract, the skin, the hemapoietic tissues, the myocardium or the thyroid gland. In addition, teratogenic and carcinogenic effects have been observed in experimental systems and/or in humans. For the general population, the diet constitutes the main route of exposure to cobalt, since it is an essential component of Vitamin B12 (hydroxycolalamin). Cobalt functions as a co-factor in enzyme catalysed reactions and is involved in the production of erythropoietin, a hormone that stimulates the formation of erythrocytes. This last property of cobalt was applied in the past as a therapy for anaemia. The carcinogenic potential of cobalt and its compounds was evaluated in 1991 by the International Agency for Research on Cancer (IARC), which concluded that there was inadequate evidence for carcinogenicity in humans (lung cancer) but sufficient evidence in experimental animal studies. In most experimental studies considered, the routes of exposure were, however, of questionable relevance for cancer risk assessment in humans for example, local sarcomas after intra-muscular injection. The general conclusion was that cobalt and its compounds are possibly carcinogenic to humans (group 2B). Since this evaluation, additional data have been accumulated which generally indicate that, depending on the considered cobalt species, different outcomes regarding toxicity, mutagenicity and carcinogenicity can be observed. Physiologically, it exists as an ion in the body. Co(II) ions are genotoxic in vitro and in vivo, and carcinogenic in rodents. Co metal is genotoxic in vitro. Hard metal dust, of which occupational exposure is linked to an increased lung cancer risk, is proven to be genotoxic in vitro and in vivo. Possibly, production of active oxygen species and/or DNA repair inhibition are mechanisms involved. Given the recently provided proof for in vitro and in vivo genotoxic potential of hard metal dust, the mechanistic evidence of elevated production of active oxygen species and the epidemiological data on increased cancer risk, it may be advisable to consider the possibility of a new evaluation by IARC.(PMID: 14643417). Cobalt has a molecular weight of 58.9 and an atomic number of 27. In the Periodic Table, close to other transition metals, it is situated in group 8, together with rhodium and iridium and it can occur in four oxidation states (0, +2, +3 and +4). The +2 and the ground state are the most common. Cobalt occurs in the minerals cobaltite (Co, Fe) AsS, smaltite (CoAs2), and erythrite Co3(AsO4)2.8H2O, and is often associated with nickel, silver, lead, copper, and iron ores, from which it is most frequently obtained as a by-product.
Resin
Resin, also known as anaflex or methylene-n,n-bis(hydroxymethyl)urea polymer, is a member of the class of compounds known as ureas. Ureas are compounds containing two amine groups joined by a carbonyl (C=O) functional group. Resin can be found in a number of food items such as common thyme, papaya, turmeric, and dandelion, which makes resin a potential biomarker for the consumption of these food products. In polymer chemistry and materials science, resin is a "solid or highly viscous substance" of plant or synthetic origin that is typically convertible into polymers. They are often mixtures of organic compounds, principally terpenes. Many plants, particularly woody plants, produce resin in response to injury. The resin acts as a bandage protecting the plant from invading insects and pathogens .
Ethylene
D006133 - Growth Substances > D010937 - Plant Growth Regulators C1907 - Drug, Natural Product > C28269 - Phytochemical It is used as a food additive .
Carbon monoxide
A one-carbon compound in which the carbon is joined only to a single oxygen. It is a colourless, odourless, tasteless, toxic gas. D018377 - Neurotransmitter Agents > D064426 - Gasotransmitters D009676 - Noxae > D000963 - Antimetabolites V - Various > V04 - Diagnostic agents